SIMPLY AUTO 400ML LACQUER HEAT RESISTANT SPRAY
Part Number: SP-013
SIMPLY AUTO 400ML LACQUER HEAT RESISTANT SPRAY
Part Number: SP-013
Simply Sprays High Temperature Paint is ideal for automotive and household uses alike where areas are exposed to high temperatures. Simply Sprays High Temperature Paint is designed to withstand temperatures of up to 650 celsius.
Variants: HEATRESISTENTSPRAY
RRP £8.99
Product Details

HIGH ADHESION — our Heat Resistant Spray Paint will adhere to most surfaces and provide a long-lasting effect.

RESISTANT TO PETROL AND CHEMICALS — our Heat Resistant Spray Paint is resistant to petrol, chemicals and weather conditions, giving you the confidence in using the product.

TEMPERATURE RESISTANT UP TO 650ºC — our Heat Resistant Spray Paint is ideal for automotive and household uses alike where areas are exposed to high temperatures. It is designed to withstand temperatures of up to 650°C. (Red only up to 300°C)

SCRATCH-RESISTANT — our Heat Resistant Spray Paint formula was created to ensure that it’s scratch-free to give you that extra bit of confidence on the road.

MULTIPLE APPLICATION — our Heat Resistant Spray Paint ensures outstanding results for household and automotive uses alike. 

AVAILABLE IN DIFFERENT COLOUR FINISHES — our Heat Resistant Spray Paint comes in many colours so choose to have your calipers finished in either yellow, red, blue or silver. 

Additional Info

Usage:

Before use, carefully read the directions on the packaging and act accordingly.

Pre Treatment:

The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Do not apply any primer.

Treatment:

The surface should be clean, dry and free of grease. The aerosol should be at room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre. 

Apply the heat resistant lacquer in several thin layers. Before applying the next layer, again shake the aerosol. Allow to dry at room temperature for one hour. Then, heat for 30 to 60 minutes (160°C) in order to harden the paint layer. Smoke develops during the lacquer hardening process. 

After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds). The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied. 

Product Specifications
Product Data
Brand Simply Auto
Package Length 19.3cm
Package Width 6.9cm
Package Height 6.9cm
Package Weight 385g
Country of Origin HOLLAND
Commodity Code 32082090
Barcode 5037409011639
Product Downloads
Recently Viewed